Photography by Dan Engongoro
Sprinkled around your party table, these glass marble party favors, with a monogram or picture will add a special touch to any occasion.
- Flat glass marbles (I used 1” clear marbles but they are available in many colors and sizes)
- 1" craft hole puncher or scissors
- Elmers glue
- pictures, monograms……..
- standard copy paper
Measure the back of your stone and reduce pics and monograms accordingly. Cut into circles. (circles should be slightly smaller than stones) Place a drop of glue on the back of the stone and smear so that the glue covers the entire area . Place picture ,monogram… face up onto glue and allow to dry.
Tip: You can add a magnet to the back of the marbles-apply with E6000 Graphics by omgdesign.weebly.com
This Article by EstherO. originally appeared in Mishpacha Magazine.